FUNCTION WINDOW

MIDI Setup

Use this page to assign controller knobs, sliders and features to target Deckadance controls as described below. Note: Before MIDI devices can be linked to controls they must be selected in the Audio & MIDI settings options. Only one controller device can be linked to Deckadance at a time.

Controls & Options

• MIDI LEARN - Activates the MIDI LEARN function to link controllers to Deckadance controls, see below. Any physical knob/slider/jog on your controller moved when this button is high-lighted will link to the item select from the Deckadance target list to the right. TIP: Double click the function in the list to active 'learn mode' in a single step.
• MIDI FORGET - Select a target in the list to the right, click MIDI FORGET to ignore the controller link.
• LOAD SETUP - Loads a controller setup.
• SAVE SETUP - Saves a controller setup.
• A / B - Select the Deck that the MIDI functions relate to.
• MISC - MIDI functions not related to any specific deck.
• MONITOR - Shows MIDI data from the controller.

NOTE: To select a pre-configured controller use the Setup Function Window

Creating / Deleting MIDI links

• To create a MIDI link with your controller:

1. Click one of the functions in the list.
2. Press the [MIDI LEARN] button.
3. Move the hardware controller target control.

OR

1. Double-click one of the functions in the list.
2. Move the hardware controller target control.

• To remove any MIDI link - select the function from the list and press the [MIDI FORGET] button OR the backspace key.